Touratech-USA

If you don't care for the 'unfinished' look of the rear subframe on the Water Cooled BMW R1200GS, these sleek and stylish side panels from Touratech are for you.  Designed specifically to compliment the overall look of the liquid cooled GS, these side panels are made of high-strength plastic with an aluminum bracket and accent piece in the middle.  Not only do they make the side of your BMW look great, they also help rain and road spray from soaking the back of your legs through the frame while you're riding.

A simple fall on the Triumph Explorer can turn into a serious expense in both time and money replacing plastic body panels. If your motorcycle tips over, no matter the road or conditions, you'll want full protection between the expensive plastic fairings, engine, and the ground.  For the most complete protection of your Explorer's engine and fairings, install a set of Touratech stainless steel crash bars.

When you first look at the front-end of the water cooled BMW R1200GS, it appears the manufacturer left something off of the brake calipers.  The tops of the calipers and brake pads are exposed and open for water, dirt, rocks or other debris to enter and affect your braking ability.  Cover and protect your brake calipers and pads with these specially designed covers from Touratech. 

You hear it all the time while riding gravel roads on the R1200GS: the sound of rocks pinging off your exhaust headers.  While it can be a beautiful sound to some, it doesn't take long to put dings, scratches and dents on the water cooled boxer's exhaust manifolds because of their exposed design.  Even on paved roads, you'd be surprised what the front tire kicks up into your exhaust pipes.  With these heavy-duty stainless steel guards from Touratech, your exhaust headers will be safe from flying rocks and debris no matter what kind of roads you're on.

Don't give rocks or branches a place to snag the underside of your GS. Close the gap between the Expedition skid plate and the rear wheel, and give a smooth sliding surface for the entire underside of your R1200GS with this skidplate extension from Touratech. Whether you're gliding your big GS over logs and rocks, or just want to keep the dirt and grime buildup off your exhaust system and centerstand, this extension is a great addition to your Expedition skid plate.

It happens to the best of us...  A parking lot tip over, gravel road drop, or even a low-side on the pavement with the R1200GS boxer engine can seriously jeopardize your trip. The valve cover and cylinder hit the ground when the heavy GS tips over, so crash bars are critical protection. Touratech crash bars protect your engine with a stainless steel cage structure that wraps around the valve cover and cylinder of the liquid cooled R1200GS for complete coverage.

Finally, an R1200GS skid plate built to withstand the rigors of a serious adventure. The R1200GS water cooled boxer is made to be ridden off-road, but has no frame underneath the motor to protect it from hazards on the ground.  The exhaust manifolds, which are routed under the engine, are also exposed, making the skid plate a true necessity. Touratech has raised the bar by engineering a skid plate with 3 levels of impact-absorbing protection for your R1200GS liquid-cooled engine.

A cracked plastic fairing or leaking radiator, after a simple tip-over, can put a dent in your pride and your wallet.  Protect your BMW R1200GS Water Boxer by adding Touratech Upper Crash Bars to your OEM BMW or Touratech engine crash bars.  

Brake fluid is the life-blood of your motorcycle's braking system.  Without it, nothing happens when you push on the brake lever coming into that hard right-hand corner.  With the rear brake reservoir exposed on the BMW R1200GS, it is far too easy to tamper with or damage while riding.  This easy to install guard from Touratech will keep your rear brake fluid reservoir safe from damage or curious hands, making sure your rear brake pedal is there when you need it.

A brand new GPS unit for your motorcycle, and nowhere to mount it?  This GPS bracket bar from Touratech gives you a solid attachment point for any one of our locking GPS mounts.  Gone are the days of trying to read shaky GPS screens or dealing with broken plastic pieces.  Made of stainless steel and anodized aluminum, this handlebar mounting adapter is built to go the distance.