« Back to Parts & Accessories for BMW HP2
Engine & Exhaust
Parts and accessories for BMW HP2 motorcycles. Product categories include Body and Fairing, Protection, Guards, Lights, Engine & Exhaust, Fuel Tank Kits, Chassis, Panniers, Tank & Tail Bags, Ergonomics, Specialty Parts, Tools & Maintenance.
The world's first oil resistant dry clutch for the BMW. Long distance and touring riders know it well: all it takes is a few drops of oil to reach the friction disc, and the BMW's stock dry clutch is no longer operational.More Information »
Made of anodized aluminum, this piece will protect your vulnerable exhaust cross over pipe from the stick and stones along the trail.More Information »
A locking oil plug, for the confidence that no one has unauthorized access to your motorcycles oil system. When "locked" the upper part spins freely, cannot be unscrewed. The key engages the lower part, allowing the cap to unscrew.
Fits all years R1200GS, R1200R, and R1200RT, including 2013-on Water Cooled models.More Information »
A spare temporary bypass in case the oil cooler has been damaged or is leaking. Simply remove the inlet and outlet lines from the oil cooler and put the tube on. More Information »
Narrow and steep mountain roads, combined with heavy loads or passenger, is an endurance test for the R1200 clutch which has a fairly low capacity for heat.More Information »
Finally, no more melted boot soles. Sturdy exhaust manifold cover for the right side of the R1200GS. It brightens up a tarnished manifold and also protects the boots. The manifold cover is made of laser cut, anodized aluminum. More Information »
With this practical little helper you can connect various electrical devices to the BMW CANbus single-wire electrical system that you want to be controlled by the ignition (key on = accessories on, key off = accessories off). This fuse block allows the addition of electrical accessories to any motorcycle including any 2005 model year and beyond BMWs with the single-wire CAN bus system.More Information »
Great protection for the oil system of your R1200GS. Keeps most pranksters out and lets most service mechanics in.
Available for all years R1200GS, R1200R, and R1200RT, including 2013-on Water Cooled models.More Information »
Valuable protection for your R1200 GS oil filler replaces the original plug on the left cylinder for the Hex-head boxer engines. The cap opens and closes with an un-common size 7mm hex wrench so that people who have no business in the engine stay out, but is easy to remove for maintenance and adding oil.
Fits all BMW R1200GS, R1200R, and R1200RT, including 2013-on Water Cooled Models.More Information »
Baja riders have long known that oiled foam filters provide the best protection from dust and debris. They can be cleaned on the road with solvent, and re-used hundreds of times. Includes external pre-filter for extra protection in extreme conditions with re-useable zipty for quick field cleaning. Touratech-USA wishes we used this filter kit on our R1200GS when it sucked its original airfilter in the intake and filled motor with dirt! Don't make the same mistake if you use your bike in offroad conditions!More Information »
These pre-filters are great for extending the life of your air filter when riding in very dusty terrain. Comes as a set of two so you always have a backup.More Information »
Finally, no more melted boot soles. Sturdy exhaust manifold cover for the left side of the R1200GS. It brightens up a tarnished manifold and also protects the boots. The manifold cover is made of laser cut, anodised aluminium. More Information »