Bolt GC10125 shown attaching the GRAB9 "45 degree" mount to an un-used mirror hole on an FJR1300.
Mirror hole M10X1.25, 20mm long
Not yet rated. Be the first to write a review
This bolt screws into the standard mirror thread of many motorcycles' un-used "mirror holes". It's an un-common thread size, but most motorcycle mirrors use this thread..
Note: Some motorcycles, Yamaha for example use a "left hand thread" on the throttle side, consequently, this bolt does not fit the throttle-side on a Yamaha.
Notes regarding use with GRAB9: To insert this 10mm bolt into the 9mm hole, the hole must be enlarged slightly, which is easy to do with a round file. Care must be taken not to allow the large bolt head (17mm) or large washers to damage the GRAB9 as it is being tightened.
Note: Some motorcycles, Yamaha for example use a "left hand thread" on the throttle side, consequently, this bolt does not fit the throttle-side on a Yamaha.
Notes regarding use with GRAB9: To insert this 10mm bolt into the 9mm hole, the hole must be enlarged slightly, which is easy to do with a round file. Care must be taken not to allow the large bolt head (17mm) or large washers to damage the GRAB9 as it is being tightened.
- M10X1.25 thread
- 20mm long
- With 2 washers
No instructions are currently available for this product.
No comments yet.
Review this Product