The stock seat of your R1200GS just isn't designed for riding in hot climates, leaving you sweaty and uncomfortable with its non-breathing vinyl co...
The R1200GS is a bike designed for long days on the road or trail, but its seat has always been the weak point. The stock foam is much too so...
If you're tired of being locked into one position in your stock BMW seat, the Touratech Sport Seat gives you ample room to shift your weight,...
Tired of being locked into one position with the uncomfortable stock seat on your R1200GS? Touratech DriRide™ breathable sport sea...
The wide, grippy, high ground clearance design of the Works foogpegs is specifically engineered for street and off road touring on your BMW GS model motorcycle. This low version of the Works foot peg sits about 20mm (.8") lower than your stock footpegs, helps relax your knees and improve your sitting and standing comfort.
The wide, grippy, high ground clearance design of the Works foogpegs is specifically engineered for street and off road touring on your BMW GS model motorcycle.
These extra-wide footpegs from Fastway are quite possibly the largest footpegs on the market for the full line of BMW GS motorcycles. Made of high strength billet aluminum, the pegs are both lightweight, and super strong.
Motorcycle windscreens are a lot like seats; no single windscreen works for everyone. This adjustable windscreen bracket from Touratech allows you to make infinite adjustments to the height and angle of your stock BMW R1200GS windscreen, fine-tuning it to your needs.
The Mark 3 Pivot Pegz have taken it to a whole new level with a mega wide 60mm platform. Due to the pivoting nature of Pivot Pegz you can have the best of both worlds, a mega wide 60mm platform and easy access to the gear shift and rear brake lever, this is due to the fact that the Pivot Pegz platform pivots and opens up access to the lower controls.
Make your BMW R1200GS "yours" by customizing the fit with Touratech bar risers. There is no substitute for a bike that fits you. When its more comfortable, it makes long trips more enjoyable.
There is nothing more satisfying than having your motorcycle fit you perfectly. It's more comfortable, it makes long trips more enjoyable and it's probably even safer, since you can be more aware of what's going on around you rather than concentrating on your discomfort.
Required to mount Mirror 040-0760 on the BMW F 800/ 650 (Twin) GS, HP2 and R 1200 GS/ Adv. Triumph Tiger 1050
These mirror extensions put the mirrors in a much better position, to improve the rider's field of vision and safety. The item is almost unnoticeable on the motorcycle but is very much appreciated by the driver.
Its a must for anyone who wants to see more than just their shoulders in the mirrors.
This set of foam grip covers is a great way to revive your motorcycle's worn out grips without having to replace an expensive factory heated grip unit. The GRAB-ON grip covers simply slide in place and hold on tight to your original grip, giving you a nice soft foam grip which makes a great difference with less vibration and more comfort on a long trip.
The R1200GS Adventure gear lever is a nice, forged Aluminum part, but the tip is rigid. With our folding tip, you can reduce the risk of breakage in a fall.
The Adjustable Folding Tip Shifter provides more options for comfort and different sized feet. The spring-loaded, machined aluminum folding tip will reduce damage during off-road riding when the bike may occasionally be tipped over or strike rocks and other foreign objects. The ability to fold protects the lever, shaft, and transmission from damage in light crashes. Constructed of steel and painted black with a heavy duty automotive lacquer. If it does get bent in a fall it can be easily straightened several times without compromising integrity.
For anyone who wears touring boots on long journeys. The footpeg width is expanded forward by about 18mm (.75 inch) reducing the distance between the touring boots and the brake lever or gear lever. The wider serrated foot base also allows longer distances to be covered comfortably while standing on the footpegs.
Specially developed for the R1200GS, low-set, height adjustable foot rest sets. By using the 3 screws on each side, the height of the footrest can be set to 4 different positions to suit almost your exact requirements.
Fastway F3 pegs have a large platform, and replaceable cleats which are actually little setscrews. There is an adjustment to set the angle. Also, installing the pivot collar upside-down sets the peg at a lower position (down+rearward about 10mm).
The footpeg width is expanded rearward by about 18mm (.75 inch) retaining the original distance between the boots and the brake lever or gear lever. The wider serrated foot base also allows longer distances to be covered comfortably while standing on the footpegs.
This throttle control from Kaoko replaces the original handlebar end weights on the BMW R1200GS and R1200GS/ADV. Sometimes referred to as 'cruise control,' this anti-slip knurled screw secures the accelerator in position. This device significantly reduces strain on the right hand during long journeys.