« Back to Specialty Parts

Other

Parts and accessories for BMW HP2 motorcycles. Product categories include Body and Fairing, Protection, Guards, Lights, Engine & Exhaust, Fuel Tank Kits, Chassis, Panniers, Tank & Tail Bags, Ergonomics, Specialty Parts, Tools & Maintenance.
$25.60
Add to Cart

Availability:
In Stock

You know the problem: with a fully packed tank bag and the handlebar turned nearly all the way,



More Information »
$84.20
Add to Cart

Availability:
In Stock
This handlebar heightener not only raises the handlebars by 26mm, it provides 3 different handlebar positions - towards and away from the motorcyclist. The original clamp is used - it is screwed on to two aluminium blocks. The blocks, facing a little outwards, are screwed on to the fork stabiliser ready to go!

More Information »
$60.30
Add to Cart

Availability:
In Stock
Do you like to have an IMO 100 and a Roadbook instead of your speed indicator on your HP2? No problem for our adapter plate!

More Information »
$74.60
Add to Cart

Availability:
In Stock

With this practical little helper you can connect various electrical devices to the BMW CANbus single-wire electrical system that you want to be controlled by the ignition (key on = accessories on, key off = accessories off). This fuse block allows the addition of electrical accessories to any motorcycle including any 2005 model year and beyond BMWs with the single-wire CAN bus system.



More Information »
$33.10
Add to Cart

Availability:
Not Stocked
A spare temporary bypass in case the oil cooler has been damaged or is leaking. Simply remove the inlet and outlet lines from the oil cooler and put the tube on.

More Information »
$38.60
Add to Cart

Availability:
Not Stocked
The 2nd onboard electrical socket is screwed on directly underneath the tachometer unit and can thus be accessed easily.

More Information »
$100.30
Add to Cart

Availability:
In Stock
An essential accessory to attach your luggage firmly and securely onto your HP2. The laser cut luggage rack has a number of slots to pull through fastening straps or belts.

More Information »
$33.30
Add to Cart

Availability:
Not Stocked

The air pump already has a holder on the HP2, but the pump is captured when you re-install the seat. You must carefully secure the pump as you replace the seat. Everytime the seat is removed, the airpump falls out of it's holder. Then if it wasn't noticed that the pump has been released, the pump will then fall down and scrape on the roadway! This is very likely to occur. The other problem is that it is near the tire and can fill with mud. It is best to move the pump up higher, to directly below the seat, with its own holder.



More Information »