Touratech Works, Footpegs, Low Version, Most BMW GS Models
The wide, grippy, high ground clearance design of the Works foogpegs is specifically engineered for street and off road touring on your BMW GS model motorcycle. This low version of the Works foot peg sits about 20mm (.8") lower than your stock footpegs, helps relax your knees and improve your sitting and standing comfort.
These "Works" foot pegs were designed specifically for the needs of long distance touring and off-road riding on your BMW GS. The serrated claw design of the peg has plenty of grip for off-road riding, but the teeth are rounded on top so they won't tear up your nice touring boots. The 52mm (2 inch) wide peg offers tons of stability when standing on up on the pegs, and support when sitting down on the street. The open design of the pegs allow clay, mud, and rocks to fall through, keeping your traction no matter what the weather or terrain. You'll never need to worry about slipping off your BMW's pegs when they're wet or muddy.
The low profile design of the pegs allow more ground clearance than most other aftermarket footpegs. The chamfered bottom edge will give you more room for clearing ruts, rocks or stumps when riding off road. Their bright stainless steel finish with laser inscription will stay looking nice for as long as they're mounted on your motorcycle.
For the standard height Works footpeg, click HERE.
NOT compatible with 2013-on Water Cooled R1200GS Models, order part # 045-5315.
- About 20mm (.8") Lower than stock without rubber insert
- 52mm (2") wide x 3.5" long
- Claw profile that is kind to your boots
- Perfect combination of grip and self-cleaning
- Designed for better ground clearance
- Strengthened mounting point
- Blasted surface finish and laser inscription
- Made in Germany by Touratech
- Fits BMW R850GS, R1100GS, R1150GS, R1150GS Adventure, R1200GS, R1200GS Adventure, R80GS, R100GS, F800GS (all years), F700GS, F650GS TWIN,F650GS Single / Dakar), G650GS / Sertao
- NOT compatible with 2013-on Water Cooled R1200GS Models, order part # 045-5315
These are great footpegs. The width provides a stability the stock ones can only dream about. The quality of construction is obvious in the thick smooth beads and perfect fit. Installation took 10 minutes. Only issue was the washers were too thick and partially obscured the hole so I couldn't get the cotter pin through - I just reused the stock washers. These pegs are surprisingly lightweight. The low version is really noticeable and provides greater comfort while both sitting and standing. Just be sure to invest in a good pair of dikes because the spring is heavy-duty.
By Pete Hemlock on Apr 09, 2014 at 06:04:43 PM
Installation was easy, but a little confusing on which way the spring should go. The welding on one side blocks the peg from swinging up, but I think I can just file it down a bit. It's a lot harder to snip the extra spring length than it seems, be careful. Overall, lower peg is perfect with the ultra-high seat, much more leg room and a more comfortable riding position. The pegs are also perfect when standing, lots of grip and area.
By Stephen on Feb 28, 2015 at 04:02:06 PM
Installation was easy, but a little confusing on which way the spring should go. The welding on one side blocks the peg from swinging up, but I think I can just file it down a bit. It's a lot harder to snip the extra spring length than it seems, be careful. Overall, lower peg is perfect with the ultra-high seat, much more leg room and a more comfortable riding position. The pegs are also perfect when standing, lots of grip and area.
By Stephen on Feb 28, 2015 at 04:02:06 PM
Review this Product