« Back to Parts & Accessories for Triumph Tiger 1050i
Suspension & Chassis
Parts and accessories for Triumph Tiger 1050i motorcycles. Product categories include Body and Fairing, Protection, Lights, Engine & Exhaust, Panniers, Chassis, Tank & Tail Bags, Ergonomics, Specialty Parts, Tools & Maintenance.
When the going gets rough, you'll want your suspension to keep up with the terrain. This spring kit is a quick and inexpensive way to drastically change your Triumph Tiger 1050i's handling performance, or to revive a worn out set of springs. The progressively wound springs for the front and rear suspension give you a plush ride at slow speeds, but when the road gets rough, or you decide to push hard in the corners, the springs are much firmer towards the bottom of the travel where you need it the most.More Information »
Touratech Suspension is the world’s first purpose-built shock absorber for long-distance touring with a fully-loaded motorcycle. Right out of the box, it has the strength, features and adjustments to go the distance on your Tiger 1050i hauling luggage.More Information »
<P>Type S46HR1C1B with remote reservoir.
<P>The best improvement you can make to any motorcycle is upgrading the suspension.More Information »
Call to Order
The Mark 3 Pivot Pegz have taken it to a whole new level with a mega wide 60mm platform. Due to the pivoting nature of Pivot Pegz you can have the best of both worlds, a mega wide 60mm platform and easy access to the gear shift and rear brake lever, this is due to the fact that the Pivot Pegz platform pivots and opens up access to the lower controls.More Information »
Protect the delicate swingarm against water and dirt. Our cover is milled from a single piece, and safely seals the bearing opening; it is also quite a sporty eye-catcher on your bike.More Information »
Call to Order
When the going gets rough, you'll want your suspension to keep up with the terrain. Installing progressive front fork springs will give your Triumph Tiger 1050i a significant improvement in handling and braking, both on and off-road. More Information »
The small base of the side stand is far too "sporty" for our liking. Before you know it, it has disappeared in the soft asphalt and your bike is on the ground. Our surface extension is milled from a single piece, and safely secured with a stainless steel holder. The side stand becomes even sportier to look at - and more functional to use.
This sidestand foot will not work on the 1050i "Special Edition."More Information »
LSLs replacement pegs are milled from ultra light aluminium. They are hollow on the inside, and the underside is milled along the curvature of the footpeg.More Information »
The pillion rider sits quite high on the back of the Tiger. With the foot pegs in the standard position, the pillion often ends up feeling tense and uncomfortable.More Information »