For anyone who drives with a pillion passenger through difficult terrain. With the studded rear footpegs the pillion passenger has a firm grip too and does not risk falling
The wide, grippy, high ground clearance design of the Works foogpegs is specifically engineered for street and off road touring on your BMW GS model motorcycle. This low version of the Works foot peg sits about 20mm (.8") lower than your stock footpegs, helps relax your knees and improve your sitting and standing comfort.
Even a simple fall can seriously bend or even break the foot lever. With no hope of continuing the journey. This problem is very easy to minimize with our foot levers, which fold at the front. The forces which are transmitted from the lever to the shaft in the event of a fall are also significantly reduced. Slightly bent levers can easily be straightened.
Specially developed for the R1200GS, low-set, height adjustable foot rest sets. By using the 3 screws on each side, the height of the footrest can be set to 4 different positions to suit almost your exact requirements.
The Mark 3 Pivot Pegz have taken it to a whole new level with a mega wide 60mm platform. Due to the pivoting nature of Pivot Pegz you can have the best of both worlds, a mega wide 60mm platform and easy access to the gear shift and rear brake lever, this is due to the fact that the Pivot Pegz platform pivots and opens up access to the lower controls.
Enables you to adapt the BMW perfectly to your requirements. Ideal when using adjustable footpegs or if the original lever simply doesn't fit. The gear lever adjusts from 12 cm to 18 cm in 10-mm stages. It also has a folding front part which limits the damage caused by falls and drops. And should the gear lever ever be bent, it is very easy to straighten it again.
For anyone who wears touring boots on long journeys. The footpeg width is expanded forward by about 18mm (.75 inch) reducing the distance between the touring boots and the brake lever or gear lever. The wider serrated foot base also allows longer distances to be covered comfortably while standing on the footpegs.
Even a simple fall can seriously bend or even break the foot lever. With no hope of continuing the journey. This problem is very easy to minimise with our foot levers, which fold up at the front.
It is particularly important when riding off-road to have the brake foot safely on the brake.
Fastway F3 pegs have a large platform, and replaceable cleats which are actually little setscrews. There is an adjustment to set the angle. Also, installing the pivot collar upside-down sets the peg at a lower position (down+rearward about 10mm).
The wide, grippy, high ground clearance design of the Works foogpegs is specifically engineered for street and off road touring on your BMW GS model motorcycle.