Touratech GPS Mount Adapters are the link between your BMW R1200GS Adventure and the Touratech GPS mount. Photo shows the 044-0770 supporting a "GPS mount" 065-0087.

GPS Mount Adapter, BMW R1200GS Adventure

  • *
  • *
  • *
  • *
  • -
Part Number: 044-0770
In Stock
Your Price: $62.50 62.50
Questions about this product?

Touratech bridges the gap between your R1200GS Adventure and your Touratech GPS mount with this bracket that connects to the windscreen support bar. The GPS Mount Adapter allows you to locate the GPS above the instruments, an optimum location for viewing.

Crafted from CNC aluminum and lazer cut stainless steel, the kit comes with everything you need to install the bracket.

To mount a GPS on your R1200GS Adventure you will need to purchase this GPS Mount Adapter in addition to the Touratech GPS Mount.

NOTE: Full windscreen adjustment may not be possible with some of the largest GPS mounts. Will not work with some "MVG" mounts, call for more details.

  • Connects a Touratech GPS Mount to your R1200GS Adventure
  • Bar is 5.125" wide, stands out 4.5 inches, and is 12mm (.5") diameter
  • Allows GPS mount angle adjustment
  • Will not work with some "MVG" mounts, call for more details
  • CNC aluminum and laser-cut stainless steel
  • Fits all model years
  • Made at Touratech factory in Germany

  • *
  • *
  • *
  • *
  • -

I finally got this to work after a bit of tweaking. Properly installed, it stays rock-steady and easily supports the lockable GPS mount for my Garmin Zumo 660. HOWEVER, you *must* do the following: 1) wrap the windshield support bracket with electrical tape at the points where you intend to attach the mount. If you don't do this, it will start sliding. 2) DON'T mount it according to the instructions; instead, mount it as shown in the photograph on the web page. The bolt heads should face *down*, not up. If you leave them facing up, you'll have to take off your windshield every time you want to tighten the bolts. 3) Crank down *hard* on the bolts. Otherwise, even with tape the mount will slip. That's why you need to mount the bolts where you can get to them easily.

By on

Review this Product
Sign In Now - OR - Register to review this product.