Synopsis

The Windscreen spoiler is easy to remove for off-road riding. It is then easily replaced for highway comfort.

1) Place the spoiler on the top edge of the windscreen.
2) Engage the metal hook at the lower edge of the windscreen.
3) Tighten the webbing to hold the spoiler in place.
4) Center the spoiler on the windscreen.
5) Position the clear "gummi" cushion elements on the inside of the windscreen as shown to hold the location as chosen.

Spoiler placed at top of windscreen with hook at bottom. Webbing is behind windscreen and the hook engages the lower edge.

These screws are used to adjust the angle of the windscreen.

Determine center position of the spoiler. Verify that windscreen surface is clean prior to adhering gummis. Place gummis adjacent to engagement clevis to save position if spoiler is removed. Gummis are shown here adjacent to the inside of the clevis. It's better to place them on the outside of the clevis.

Verify that windscreen surface is clean. Place gummis as shown (on backside of windscreen) to prevent hook from sliding on the lower edge of windscreen.